سؤال
ترك رسالة
إذا كنت مهتمًا بمنتجاتنا وترغب في معرفة المزيد من التفاصيل، فيرجى اترك رسالة هنا، وسنرد عليك في أقرب وقت ممكن.
تمتلك شركة GESTER أكبر تشكيلة من غرف الاختبار.
مورد محترف لغرف اختبار البيئة
‌ㅟᅠ
Thermal Abuse Test Chamber

Thermal Abuse Case Stress Test Chamber GT-I13

Mainly used for furnace heat test, heating test and other battery safety performance detection.

 

Key Features

- Programmable temperature control with automatic temperature compensation.

- Explosion-proof pressure relief structure and over-temperature protection.

- Forced horizontal air circulation for uniform heat distribution.

 

Key Specifications

Max. Temperature: 150°C

Temperature Deviation: ±2°C

Chamber Capacity: 125 L

  • رقم الصنف :

    GT-I13
  • الطلب (الحد الأدنى للكمية) :

    1
  • Thermal  Abuse Case Stress Test Chamber

     

    Thermal  Abuse Case Stress Test Chamber for Battery Safety Evaluation

     

    The GT-I13 Thermal Abuse Case Stress Test Chamber is designed to evaluate the thermal safety performance of batteries and battery packs through controlled high-temperature exposure. It is mainly used for furnace heat tests and heating tests to assess battery behavior under specified thermal conditions.

     

    The chamber provides an adjustable temperature range of RT+10°C to 150°C, with a configurable heating rate of 5±2°C/min. Its PID temperature control system maintains stable test conditions, while the explosion-proof pressure relief structure and multiple safety protection features help reduce risks during testing. It is suitable for battery manufacturers, electronics laboratories and quality control facilities conducting thermal abuse evaluations.

     

    Key Features & Advantages

     

    Designed for Controlled Battery Thermal Abuse Testing

     

    ·  Adopts PID control system, intuitive and easy to operate, with full automatic constant temperature and rapid temperature compensation function.

    ·  Equipped with over-temperature protection and automatic power-off system for over-load.

    ·  New high temperature resistant long-shaft motor.

    ·  Four casters at the bottom for easy moving and fixing.

    ·  Circulation system: forced horizontal air supply circulation.

    ·  Heating system: PID+SSR.

    ·  Timing function: power-off and alarm indication when the set temperature is reached and the holding time is elapsing.

     

    Standards

     

    GB 31241 – Safety Requirements for Lithium-Ion Batteries and Battery Packs for Portable Electronic Products

    IEC62133 – Safety Requirements for Portable Sealed Secondary Lithium Cells and Batteries.

    UL1642 – Standard for Lithium Batteries.

    GB 38031 – Safety Requirements for Traction Batteries of Electric Vehicles.

     

    Standard Requirement:

    Fully charge the battery according to the specified test method and place it in the test chamber. The test chamber heats up at a rate of (5±2)℃/min, and maintains a constant temperature of 130℃±2℃ for 30 minutes after reaching the temperature.

    Acceptance Criterion: The battery shall not catch fire or explode.

     


     

    Product Specification

     

    Model

    GT-I13

    Temperature range

    RT+10~+150℃ (adjustable at will, 130℃ for common use)

    Temperature deviation

    ±2.0℃ (no-load)

    Temperature accuracy

    ±0.5 °C

    Temperature rise rate

    5°C ± 2°C/min (linearly adjustable)

    Storage shelf

    Load capacity ≥30Kg; 1 shelf provided, made of SUS201 stainless steel

    Inner chamber material

    SUS304 stainless steel

    Sealing strip

    Corrosion-resistant silica gel

    Temperature controller

    Ambient temperature RT+10℃~150℃

    Temperature rise rate: 5±2℃/min (linearly configurable)

    Temperature fluctuation: 0.5℃

    Temperature uniformity: ±2℃

    Timing setting

    99H59M59S can be set

    Cooling method

    Natural cooling

    Heating material

    Stainless steel finned nickel-chromium alloy heat dissipation tubes, which are pollution-free and have a long service life

    Sensor

    K-type high-precision temperature sensor

    Controller

    Installed on the upper part of the equipment; equipped with stainless steel luxury handle and explosion-proof door lock catch

    Inner chamber material

    SUS201 stainless steel; the inner cavity is clean and smooth, easy to clean without residue, and has strong corrosion resistance. All internal materials are low-pollution, and the inner barrel is fully welded by seamless argon arc welding

    Outer chamber material

    SECC steel plate, 1.5mm thick, with fine powder baking finish

    Observation window

    double tempered glass observation window, size 250*250*5 mm

    Insulation material

    The insulation layer of the entire inner chamber is 100MM thick, adopting fire-resistant high-strength PU polyurethane foam insulation material (with better heat insulation and fire resistance than ordinary PU); insulation coefficient: <0.0212kcal/m∙hr

    Circulation system

    Special moisture-proof and heat-dissipating design; stainless steel extended shaft circulation motor equipped with high and low temperature resistant aluminum alloy multi-wing fan blades

     

    Manufacturer & Quality Assurance

     

    GESTER – Battery Testing Equipment Manufacturer

    GESTER provides testing equipment for material, product and battery safety performance evaluation.

     

    For the Thermal Abuse Case Stress Test Chamber  GT-I13, customers can obtain support throughout the equipment purchasing and application process:

    - Manufacturing & Assembly: Equipment production and assembly with attention to chamber construction and component configuration.

    - Product Development: Technical development to support different testing requirements.

    - Calibration Support: Temperature measurement and calibration support according to applicable procedures.

    - Technical Assistance: Guidance on equipment operation, test settings and routine maintenance.

    - Customization: Technical discussions on chamber configurations and customer-specific requirements.

     

    Contact our team to discuss your battery thermal abuse testing requirements and equipment configuration.

     


     

    FAQs About GT-I13 Thermal Abuse Case Stress Test Chamber

     

    Q1: What batteries can be tested using the Thermal Abuse Test Chamber GT-I13?

     

    The Thermal Abuse Test Chamber GT-I13 is mainly designed for thermal abuse testing of lithium-ion batteries and battery packs. The specific sample size and configuration should be confirmed before ordering.

     

    Q2: Can the chamber perform the 130°C thermal abuse test?

     

    Yes. The chamber supports temperatures up to 150°C and can be configured for the typical 130°C±2°C test condition with a heating rate of 5±2°C/min.

     

    Q3: How long can the temperature holding time be set?

     

    The timer supports settings up to 99 hours, 59 minutes and 59 seconds. For the typical thermal abuse procedure, the holding time is 30 minutes.

     

    Q4: What safety protection features does this chamber have?

     

    It includes over-temperature protection, automatic power-off protection against overload, an explosion-proof pressure relief device, an exhaust system and an explosion-proof door locking structure.

     

    Q5: Can operators observe the battery during testing?

     

    Yes. The chamber features a double-tempered-glass observation window and internal LED lighting, allowing operators to monitor the sample during testing.

     

    Q6: Can the Battery Thermal Abuse Test Chamber accommodate different battery sample sizes?

     

    The Battery Thermal Abuse Test Chamber has internal dimensions of 500 × 500 × 500 mm and one adjustable shelf with a maximum load capacity of 30 kg. Please provide your battery dimensions and test fixture requirements for configuration evaluation.

     

ترك رسالة
إذا كنت مهتمًا بمنتجاتنا وترغب في معرفة المزيد من التفاصيل، فيرجى اترك رسالة هنا، وسنرد عليك في أقرب وقت ممكن.

ترك رسالة

ترك رسالة
إذا كنت مهتمًا بمنتجاتنا وترغب في معرفة المزيد من التفاصيل، فيرجى اترك رسالة هنا، وسنرد عليك في أقرب وقت ممكن.