
The Fully Automatic Environmental Battery Test Chamber GT-I20 is designed to provide controlled temperature and humidity conditions for evaluating the environmental performance of lithium-ion cells, battery modules, battery packs, and electronic components.
Equipped with a programmable touchscreen controller, real-time monitoring functions, and dedicated battery safety protection systems, the chamber helps laboratories and manufacturers evaluate battery performance and environmental adaptability under controlled conditions. Its integrated safety provisions support the management of potential hazards associated with battery testing.
Dedicated Battery Safety Protection System
Battery testing requires additional safety considerations, particularly when evaluating lithium-ion cells and battery packs. GT-I20 incorporates multiple safety provisions:
- Gas Monitoring: CO, H2, and O2 gas monitoring sensors.
- Nitrogen Purge: Provision for N2 purging.
- Fire Suppression: Automatic FM-200 fire suppression system with Pt-100 sensing.
- Leakage and Venting Protection: Designed to support battery leakage and venting protection.
- Non-Sparking Fan: Helps reduce potential ignition risks.
- Audio-Visual Alarms: Provides audible and visual warnings during abnormal conditions.
- Door Lock Safety: Automatic magnetic lock or chain-linked safety lock.
- Explosion Protection: Dedicated arrangement for battery blast safety.
Product Specification
|
Model
|
GT-I20
|
|
Capacity
|
225L
|
|
Inside dimension (WxDxH)
|
500 x 500 x 750 mm
|
|
Temperature Range (without humidity control)
|
-40°C to +150°C, accuracy and uniformity ±1.0°C
|
|
Temperature Range (with humidity control)
|
20°C to +100°C, humidity 20%-98%RH, ±2.5%RH
|
|
Test Space Load Bearing Capacity
|
10 kg or higher, uniformly distributed load (UDL)
|
|
Heat Load
|
1000W
|
|
Inner Chamber Construction
|
AISI-304 stainless steel, mirror finish
|
|
Shelf Arrangement
|
Two adjustable stainless steel shelving channels with adequate load bearing capacity
|
|
Plenum Area
|
Dedicated plenum section accommodating blower, heaters, evaporator and dehumidification system
|
|
Entry Ports
|
1 No. LHS Ø100 mm and 1 No. RHS Ø50 mm insulated cable entry ports
|
|
Port Construction
|
Non-conductive silicone ports with removable silicone plugs
|
|
Exterior Construction
|
Minimum 14-gauge galvanized steel
|
|
Door Construction
|
Full access hinged insulated door with pull-action latch lock
|
|
Door Features
|
Limit switch and anti-condensation heaters
|
|
Insulation
|
High-density mineral wool insulation, up to 48 kg/m3, asbestos-free
|
Manufacturer & Quality Assurance
Reliable battery environmental testing requires more than temperature and humidity control. Chamber construction, control system integration, and safety protection configuration all play important roles in testing reliability.
GESTER provides technical consultation for environmental testing equipment, helping customers evaluate chamber capacity, operating conditions, control requirements, and application-specific configurations.
Contact GESTER to discuss your battery testing requirements and obtain a configuration proposal.
Frequently Asked Questions
Q1: What types of batteries can the Battery Environmental Test Chamber GT-I20 test?
Battery Environmental Test Chamber GT-I20 is suitable for environmental testing of lithium-ion cells, battery modules, and battery packs. It can also be used for electronic component testing.
Q2: What is the temperature and humidity range of this battery test chamber?
Without humidity control, the temperature range is -40°C to +150°C. With humidity control, the operating temperature range is +20°C to +100°C, with humidity adjustable from 20% to 98% RH.
Q3: What battery safety protection features are included?
The Battery Testing Chamber provides multiple safety provisions, including CO, H2, and O2 gas monitoring, nitrogen purge provision, automatic FM-200 fire suppression, non-sparking fan, audio-visual alarms, door lock safety, and explosion protection arrangements.
Q4: Can the Lithium Battery Test Chamber be monitored remotely?
Yes. The controller supports Ethernet and USB communication, PC/laptop or tablet operation, and Industry 4.0-based IoT integration for remote monitoring and data analytics.
Q5: Does the Battery Temperature Humidity Chamber support automatic test programming?
Yes. The 7-inch programmable touchscreen controller allows users to configure and manage test programs, monitor operating conditions, and receive alarm notifications.
Q6: Can the battery safety protection system be customized?
The required safety configuration should be evaluated according to the battery type, test conditions, installation environment, and applicable safety requirements. Contact GESTER to discuss project-specific requirements.